MCA2002
A complete line of equipment
MCA2002
.
Features
Cutting capacity Ø4 A Ø25;
Pneumatic drive;
Operation by programmable logic controller (IHM + PLC) touchscreen 7”;
Guillotine - cutting blade (HxLxWmm) 90.50 x 1.50 x 110;
Cut Quality ± 0 a 1%;
Minimum pneumatic supply - minimun pressure 4bar (58PSI);
Dimensiones (AxCxL) 1120X900X910mm Peso 220Kg;
Stepper Motor;
Usually
Purchased together
Crimping machines
PM30
The PM30 hydraulics machine presses hoses light and low fully manual for easy handling and high performance.
Crimping machines
PPM60
The PPM60 is a machine to presses hydraulic hoses of low and medium pressure between 3/16” to 1” with 1 and 2 wefts of steel. Its innovative and compact design makes this press ideal for on-site maintenance.
Crimping machines
MM40
The MM40 is a machine to presses hydraulic hoses of low and medium pressure between 3/16” to 1.1 / 4” with 1, 2, and 4 steel wefts.
Crimping machines
PHV65 ECD
The PHV65 ECD hydraulics machine presses low, medium, high and super high-pressure hydraulic hoses between 3/16” to 2” with 1, 2, 4 steel wefts.
Crimping machines
PHV110 ECD
The PHV110 ECD hydraulics machine presses low, medium, high and super high-pressure hydraulic hoses between 3/16” to 2” with 1, 2, 4 and 6 steel wefts.
Crimping machines
PVE110
The PVE110 ECD hydraulics machine presses low, medium, high and super high-pressure hydraulic hoses between 3/16” to 2” with 1, 2, 4 and 6 steel wefts and up to 3” for industrial hoses (on request).
Crimping machines
MP4TS
The MP4TS is a machine for pressing low, medium, high and super high-pressure hydraulic hoses between 3/16” to 2” with 1, 2 and 4 steel wefts.
Crimping machines
MP6T
The MP6T hydraulics machine presses low, medium, high and super high-pressure hydraulic hoses between 3/16” to 2” with 1, 2, 4 and 6 steel.
Crimping machines
PH200
The PH200 hydraulics machine presses low, medium, high and super high-pressure hydraulic hoses between 3/16” to 2.1/2” with 1, 2, 4 and 6 steel wefts.
Crimping machines
MP10T
The MP10T hydraulics machine presses low, medium, high and super high-pressure hydraulic hoses between 3/16” to 2” with 1, 2, 4 and 6 steel wefts and up to 11” for industrial hoses.
Crimping machines
PHC100
The PH100 hydraulics machine presses low, medium, high and super high-pressure hydraulic hoses between 3/16” - 2” up to 6S with 1, 2, 4 and 6 steel wefts.
Crimping machines
PHC150
The PH150 hydraulics machine presses low, medium, high and super high-pressure hydraulic hoses between 3/16" - 2" and 5" up to 6T with 1, 2, 4 and 6 steel wefts and up to 5” for industrial hoses.
Cutting machines
MC250
The MC250 cutting machine is easy to operate, providing quick, clean and safe cutting without damaging such as steel wefts and the external and internal rubber protection of hydraulic hoses between 3/16” to 2” with 1, 2 and 4 steel wefts.
Cutting machines
MC300
The MC300 cutting machine is easy to operate, providing quick, clean and safe cutting without damaging such as steel wefts and the external and internal rubber protection of hydraulic hoses between 3/16 ”to 2” with 1, 2, 4 and 6 steel wefts.
Cutting machines
MC3002
The MC3002 cutting machine is easy to operate, providing quick, clean and safe cutting without damaging such as steel wefts and the external and internal rubber protection of hydraulic hoses between 3/16 ”to 2” with 1, 2, 4 and 6 steel wefts.
Cutting machines
MC3005
The MC3005 cutting machine is easy to operate, providing quick, clean and safe cutting without damaging such as steel wefts and the external and internal rubber protection of hydraulic hoses between 3/16" to 2 1/2" with 1, 2, 4 and 6 steel wefts.
Cutting machines
MCA 3002
The automated cutting machine MCA3002 guarantees an excellent performance, being able to cut large quantities of hose quickly and safely without damaging the steel wefts and the external and internal rubber protection of hydraulic hoses from 3/16” to 5/8” with 1 and 2 steel wefts.
Skiving machines
MD3003
MD3003 is a Hydraulic Hose debarking machine that allows external skiving on hoses with an external diameter from 1/4″ to 2″ and internal skiving on hoses with a diameter of 5/8″ to 2″.
Testing and cleaning bench
MLLTS300
The MLLTS300 is equipment for cleaning, washing, drying and testing hydraulic hoses that allow hydrostatic testing of up to 15,000 PSI (1000 Bar). It has pressure sockets that allow testing up to 6 simultaneous parts in 3/16” to 2" hoses.
Testing and cleaning bench
PL10
The cleaning gun PL10 was developed for cleaning and decontamination of tubes, pipes and hoses with diameters from 1/4” to 2” using compressed air.
Testing and cleaning bench
BTM700
The BTM 700 manual test bench allows hydrostatic tests (6 simultaneous parts) of up to 10,000 PSI (700 Bar) in hydraulic hoses between 3/16 to 2 ”with 1, 2, 4 and 6 steel wefts.
Inserting fitting machines
MMT500
The MMT500 Coupling Inserting Machine for industrial hoses is easy to operate and ensures the operator agility and ease in the process of fitting large couplings.
Accessories and parts
Die sets holder
Aluminum die sets holder for Crimping Machines.
Accessories and parts
Rings repair kit
Rings repair kit for Crimping Machines.
Accessories and parts
Micrometer
Easy-to-read real-scale micrometer for Crimping Machines.
Accessories and parts
Sensors
Red and green sensors for Crimping Machines.
Accessories and parts
Fixed plate
Fixed plate for Crimping Machines.
Accessories and parts
Set of Easy Change System
Set of Easy Change System for pressing machines.
Accessories and parts
Cutting disc
Cutting disc for cutting machines.
Accessories and parts
Mobile plate
Mobile plate for pressing machines.
Accessories and parts
Relays
Relays for Crimping Machines.
Accessories and parts
Tray
Tray for skiving machines.
Accessories and parts
Advance pedal
Actuation pedal for pressing and skiving machines.
Accessories and parts
Electrical panel PH - MP - PHC lines
Electrical panel for Crimping Machines PH - MP - PHC lines.
Accessories and parts
Complete electric pedal
Complete electric pedal for pressing machines.
Accessories and parts
Set of Easy Change Dies System
Set of Easy Change Dies System for pressing machines.
Specials
MGC70
The MGC70 engraver was developed to engrave names, codes and serial numbers on hydraulic terminal covers between 1/4” to 2”.
Crimping machines
PHC380
The PHC380 hydraulic machine presses industrial hoses up to 14”.
Accessories and parts
Electrical panel PE - PHV lines
Electrical panel for Crimping Machines.
Accessories and parts
Panel with tactile keyboard and integrated PLC
The panel with integrated PLC provides greater human-machine interaction, and provides various benefits.
Cutting machines
MC3002 PNEUMATIC
The pneumatic MC3002 cutting machine is easy to operate, providing quick, clean and safe cutting without damaging such as steel wefts and the external and internal rubber protection of hydraulic hoses between 3/16” to 2” with 1, 2, 4 and 6 steel wefts.
Cutting machines
MCA4002
The automated cutting machine MCA4002 guarantees an excellent performance, being able to cut large quantities of hose quickly and safely without damaging the steel wefts and the external and internal rubber protection of hydraulic hoses from 3/16” to 1” with 1, 2 and 4 steel wefts.
Skiving machines
MMD1000
MMD1000 is a Hydraulic Hose Skiving machine that allows external skiving on hoses with an external diameter from 1/2″ up to 2″ and internal skiving on hoses with a diameter of 3/4″ up to 2″
Crimping machines
PCF80
The PCF80 hydraulics machine presses low, medium, high and super high-pressure hydraulic hoses between 1/4" up to 1.1/4" with 1 and 2 steel wefts. Its unique design with lateral opening allows radial feeding to crimp terminals with the most diverse formats.
Crimping machines
MP6TS
The MP6T hydraulics machine presses low, medium, high and super high-pressure hydraulic hoses between 3/16” to 2” with 1, 2, 4 and 6 steel wefts and up to 4” for industrial hoses (on request).
Specials
MCE60
The MCE60, developed by Prensso Máquinas, is designed to optimize the application of protective spirals on high-pressure hoses
Accessories and parts
PROTECTIVE SEALS FOR HOSES
Prensso's heat-shrink seal is a film that perfectly conforms to hoses or tubes when heat is applied. This shrinkage process occurs uniformly, encasing the hose or tube end to create a protective seal that prevents contamination after product cleaning and decontamination. Beyond protection, the seal enhances the final product's professional appearance, giving customers a perception of excellence and quality.
Accessories and parts
PSC60
Thermal diffuser accessory to seal hydraulic terminals. Maximum operation capacity diameter is 80mm.
Accessories and parts
PDC 80 Thermal equipment for sealing
Thermal equipment for sealing hydraulic terminals. Operating capacity with a maximum diameter of 80mm.
Cutting machines
MCA2002
.
Specials
PMA1000
PMA1000 Analog Hose Meter: The robust and reliable solution for precise measurement of industrial hoses. Designed to deliver ±1.0% accuracy with a scale resolution in tens of centimeters (x10 cm). This equipment is ideal for those seeking efficiency without compromising quality. With capacity to measure hoses from 3/16" to 2" (6 braids), the PMA1000 combines durability and functionality in a practical design.
Crimping machines
PBA180 – Hydraulic Press for Air Spring Bags
The PBA180 is a hydraulic press designed to deliver maximum strength, precision, and productivity in pressing air spring bags, especially for automotive suspension systems. Its compact and efficient design ensures reliability in assembling air bags of all sizes, meeting the demands of various industries.
